Mr. Buffer Metal Polish

How to polish metals with Mr. Buffer Metal Polish:

Always SHAKE WELL before use.


Mr. Buffer is very easy to use and will produce levels of shine virtually unobtainable by other polishes. It can cut polish time by 60%-70% while cleaning residue and scratches at an industrial strength level unlike anything you have seen.

1) Simply apply a small amount of Mr. Buffer to a soft cotton/wool rag or buffing pad. - The softer the cloth, the finer the finish you can obtain. For heavier cleaning needs, use a more abrasive cloth.

2) Buff the metal surface with pressure as needed. While polishing, allow Mr. Buffer to dry on the metal into a film. This will allow Mr. Buffer to clean the metal.

3) After the polish dries from buffing, remove with a clean dry towel by wiping away! Again, softer cloths will obtain more of a mirror shine.

4) Repeat as desired to get that perfect shine.

---

PRODUCT INFORMATION:

NO Acids, Citrus, Ammonia or other Caustic Materials

POLISHES with 60%-70% LESS WORK!
POLISHES: Aluminum, Chrome, Silver, Gold, Brass, Copper, Steel, Pewter, Pressed Aluminum (Diamond Plate Aluminum) and most metals to a perfect Mirror Shine!

REMOVES: Rust/Oxidation, Corrosion, Tarnish, Streaking, Scratching, Water Spots, Discoloration and other Blemishes or Residues.

Protects and Restores: Cars, Trucks, Motorcycles, Boats, Aircraft, Silverware, Tool Boxes, Railing and anything metal from daily wear and tear of the elements or the road.

100% Satisfaction Guarantee! See "Guarantee" section

DANGER: Harmful or fatal if swallowed. Keep away from Heat, sparks or flame. Use with adequate ventilation. Avoid repeated or prolonged contact with skin. In case of contact with eyes, flush generously with water. If irritation persists, see a physician. If swallowed, DO NOT INDUCE VOMITING. Call Hospital, Physician or Emergency Room. KEEP OUT OF REACH OF CHILDREN.




© 2011 Mr. Buffer